Thursday, November 10, 2016

Overnight Onramp Closure NB SR13 At Moraga Start Nov 14


State of California • Department of Transportation

TRAFFIC ADVISORY

__________________________________________________________
Date: November 10, 2016
District: 4 - Oakland
Contact: Shannon Brinias
Phone: (510) 286-5543

FOR IMMEDIATE RELEASE

Weeklong Full On-Ramp Closure on State Route 13 Northbound
at Moraga Avenue in Alameda County
November 14 through November 19

Oakland, Calif. – Caltrans will begin a 6-day full on-ramp closure in order to rebuild the ramp roadway pavement as part of the Storm Damage Repair Project on State Route 13 (SR-13) at Moraga Avenue in Alameda County.

The project is located east of the on ramp shoulder of northbound SR-13 (NB SR-13). The purpose of the project is to repair the slope and prevent further slide damage to the hillside. The project includes constructing earth retaining structures with a replanting project to follow construction.

The Moraga Avenue on ramp to SR-13 northbound from Thornhill Drive westbound in the Montclair neighborhood is anticipated to be closed during the following time period:

• Monday November 14 from 12:00 AM until Saturday November 19 at 12:00 PM (6 full days).

Additionally:

• SR-13 NB in the area of Moraga Avenue will be reduced to one lane intermittently from Monday November 14 through Saturday November 19 during the following non-commute hours:
 12:00 AM until 6:00 AM
 9:00 AM until 3:00 PM
 8:00 PM until 11:59 PM.

Detour signs will be in place to redirect motorists towards alternate routes. Construction vehicle traffic and noise may be experienced in and near the construction area and Fernwood Drive.

More information is available at: http://www.dot.ca.gov/dist4/projects/13storm/.

Motorists should drive with caution through the work zone.

Get real-time traffic on Caltrans

Quickmaps: http://quickmap.dot.ca.gov/ Or follow Caltrans on Twitter: http://twitter.com/CaltransD4.

Caltrans appreciates your patience as we work to maintain California’s highways. Please #BeWorkZoneAlert.


###

No comments:

Post a Comment